|
STI-6400
Exit Stopper® Multifunction Door Alarm
Highly effective, alarm alerts you to any unauthorized exits/entries through emergency exit doors and rear doors. Serves as an inexpensive security device and helps stop theft as well.
If the protected door is opened, the electronic Exit Stopper emits an ear piercing alarm for 10 beeps, 30 seconds, three minutes or continuously |
|
EST SIGA-DH
Duct Smoke Detector Housing
The EST SIGA-DH Duct Smoke Detector Housing uses all the capabilities of XLS intelligent photoelectric and multisensor smoke detectors. XLS intelligent smoke detectors gather analog information from their sensing element(s) and converts it into digital signals. Quantity discounts. |
|
EST SIGA-PS Our Most Popular Smoke Detector
Intelligent Photoelectric Smoke Detector
The Signature Series Model SIGA-PS gathers analog information from its smoke sensing element
and converts it into digital signals. The detector’s on-board microprocessor measures and analyzes these signals. It compares the information to historical readings and time patterns to make an alarm decision. Digital filters remove signal patterns that are not typical of fires. Unwanted alarms are virtually eliminated. |
|
GE 429CRT
Self-Diagnostic 2-wire Smoke Detector
The 429 series self-diagnostic, 2-wire smoke detectors continually monitor their own sensitivity and operational status, and provide a visual trouble indication if they drift out of sensitivity range or fail internal diagnostics.
The 429 series is easily cleaned by replacing the proprietary field-replaceable optical chamber. All models are designed to reduce false alarms. |
|
GE 449CRT
Self-Diagnostic 4-Wire Smoke Detector
Self-Diagnostic Photoelectric 4-Wire Smoke Detector with Heat Sensor & Auxiliary Relay, 12/24 VDC. Integral 135° F fixed temperature/rate-of-rise heat sensor. Auxiliary relay |
|
521CRXT
Photoelectric 2-Wire Smoke Detector
The 500 series self-diagnostic, 2-wire smoke detectors are
conventional direct-wire detectors with analog features.The detectors continually monitor their own sensitivity and operational status.
|
|
541CRXT
Photoelectric 4-Wire Smoke Detector
With Heat Sensor, 12/24 Vdc. Smart Dual Fixed/Rate Of Rise Heat Sensors.
The 500 Series self-diagnostic, 4-wire smoke detectors are conventional direct-wire smoke detectors. |
|
ASD-PL2F
Analog Addressable Plug-in Smoke Sensor
Sensitivity can be programmed in the control panel software, and is continuously monitored and reported to the panel. Point ID capability allows each sensor’s address to be set, providing exact locations for selective maintenance when the chamber contamination reaches an unacceptable level. |
|
DFE 135/190
Fixed Temperature Heat Detector
is
suited for installation where high heat output fires are
expected or in areas where ambient conditions would
not allow use of other detection methods.
Heat detectors are used for property protection. Do not
rely on heat detectors for life safety protection. Where
life safety is involved, smoke detectors must also be
used. |
|
YBN-NSA-4 and the HSB-NSA-6 Mounting Bases
These mounting basses are electronics free and contain a
simple rugged design with screw terminals for wiring
connections. A common mounting base allows sensor
interchange and maintains loop continuity when sensors
are removed. A simple anti-tamper head locking
system is provided which is enabled by removing a small
plastic tab on the back of the sensor.
Top of page |
|
|
GE EST 2 PANEL
As a mid-range panel with big system features and performance, it's little wonder that EST2 has taken the life safety industry by storm. Its capacity and price make it ideal for commercial installations, and hospitals, and it's a perfect match for schools. But when it comes down to it, typical applications for the EST2 are virtually endless.
Taking full advantage of Signature Series intelligent detectors and modules, EST2 offers the very best in analog technology including automatic device mapping and programming, detailed reports, as well as electronic addressing. |
|
GE EST 3 PANEL
An ideal solution for high-rise office towers and campus style installations, the EST3 supports a total network length of an incredible 60 miles and it does this without sacrificing even a nanosecond from its lightning fast three-second response time.
EST3's user interface offers simple yet powerful control and display in any situation. Fingertip operation and intuitive feedback provide the big picture whether the user is in the midst of a crisis, or simply performing routine maintenance. |
|
QUICKSTART PANEL
QuickStart lives up to its name in every respect. Easy to install, simple to set up, and rock-solid when it comes to performance, this system is an installer’s dream. With QuickStart, the battle against time is over and you come out on top. Its exclusive QuickStart front-panel auto-learn routine, combined with its built-in scanner port means you’re up and running in no time flat. (Brochure) |
|
FIRESHIELD PANEL
FireShield panels incorporate features like front panel programming, one person walk testing, and selectable IDC and NAC types. These features are designed to simplify installation, operation and maintenance while keeping costs in-check.
FireShield panels are powerful enough to meet the demands of today’s installations while leaving plenty of room to grow in the future.
FireShield provides smoke and fire detection, occupant notification and off-premises signaling for small- to medium sized buildings. (Brochure) |
|
MS-9050UD FIRELITE PANEL
Suited for stand-alone applications, the MS-9050UD is ideal for smaller facilities such as apartment complexes, banks, cinemas, child care and elementary schools, department stores, food stores, places of worship, restaurants, small retail outlet stores, and other facilities requiring performance-based, sophisticated technology at reasonable cost.
Top of page |
|
|
DCP-AMS Addressable Manual Pull Station
STANDARD FEATURES
Addressable integrated design,
All metal construction,
Single and dual action models available,
Extremely easy to operate,
Bi-colored status LED indicates, Standby and Alarm conditions,
Address is programmable in EEPROM,
Address can be programmed when installed,
Key lock or hex key lock models available,
Terminals accept up to 14AWG wire. |
|
DCP-AMS-KL Addressable Manual Pull Station
STANDARD FEATURES
Addressable integrated design,
All metal construction,
Single and dual action models available,
Extremely easy to operate,
Bi-colored status LED indicates, Standby and Alarm conditions,
Address is programmable in EEPROM,
Address can be programmed when installed,
Key lock or hex key lock models available,
Terminals accept up to 14AWG wire. |
|
DCP-AMS-LP Addressable Manual Pull Station
STANDARD FEATURES
Addressable integrated design,
All metal construction,
Single and dual action models available,
Extremely easy to operate,
Bi-colored status LED indicates, Standby and Alarm conditions,
Address is programmable in EEPROM,
Address can be programmed when installed,
Key lock or hex key lock models available,
Terminals accept up to 14AWG wire. |
|
DCP-AMS-KL-LP Addressable Manual Pull Station
STANDARD FEATURES
Addressable integrated design,
All metal construction,
Single and dual action models available,
Extremely easy to operate,
Bi-colored status LED indicates, Standby and Alarm conditions,
Address is programmable in EEPROM,
Address can be programmed when installed,
Key lock or hex key lock models available. |
|
278 - Addressable Manual Pull Station
Addressable integrated design,
All metal construction,
Single and dual action models available,
Extremely easy to operate,
Bi-colored status LED indicates, Standby and Alarm conditions,
Address is programmable in EEPROM,
Address can be programmed when installed,
Key lock or hex key lock models available. |
|
BG-12 Series Pull Station
Series is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. It was designed to meet multiple applications with the installer and end-user in mind. The BG-12 Series features a variety of models including single- and dual-action versions. |
|
BG-8 Series Pull Station
The BG-8 Manual Pull Station is a metal pull station that provides a single-action, normally-open contact alarm initiating point for use with UL listed Fire Alarm Control Panels. Can be seen from 100 feet away.
Top of page |
|
270-DPO Double Pole / Normally Open Pull Station
The 270 Series fire alarm pull station is for fire alarm installations in schools, hospitals, factories, and industrial locations. Die cast metal construction,
Terminal strip wiring,
Break glass type,
Single action.
Available in both open and closed circuit designs and has a tamper proof reset function. The station's die cast body is painted red, with painted silver stripes. |
|
270-SPO - Pull Station - Single Pole, Normally Open
The 270 Series fire alarm pull station is for fire alarm installations in schools, hospitals, factories, and industrial locations.
Available in both open and closed circuit designs and has a tamper proof reset function. The station's die cast body is painted red, with painted silver stripes. |
|
| |
TITLE
Coming Soon
Top of page |
|
| |
TITLE
Coming Soon
Top of page |
|
| |
TITLE
Coming Soon
Top of page |
